Heavy duty Sand Anchor made in USA with heavy duty 400 Deniern Pack Cloth Fabric (unlike other sand anchors constructed with 1.5oz Ripstop Nylon) with 4 double stitch straps. Each strap is 1 inch wide rated at 3500 lbs (57inch Sand Anchor 1.0 straps rated at 3700 lbs) constructed with 3 inch loops and extend 18 inches. All four sides are stitched with double folded bias tape for long lasting durability. Available in random colors including Blue, Red and Black. 18in x18in or 36in x 36in or 57in x 57in.  See Manual for instructions. These Sand Anchors are made in USA.
SIZE RECOMMENDATION UP to 16 to 22 MPH
18x18 for use with Diamond and Delta kites under 6.5 ft and under. Small Parafoils 7.5  and under. Box and cellular. Also useful to hold down easy ups with use of bungy on each corner.
36X36 for use with Power Sled 24 and Delta kites 9ft and under, Flowform 60 and smaller or Parafoil 60 and smaller
36x36 for use with Power Sled 36 and delta kites 11ft to 16ft, Flowform
125 and 214.
57x57 for use with Flowform 214, Power Sled 81, 19ft 'Delta and up.
NOT RECOMMENDED FOR USE WITH BOLS LARGER THAN 13FT DIA.
WARNING
Sand Anchors should be checked prior to use, wet sand and salt may cause
failure in loops or stitching over time. We are not responsible for failure and
use by not following the proper setting and limitations of these sand anchors.